Approximation and Errors

A Formula 1 driver has recorded a lap time of $1.24572$ minutes. To simplify the graphics in the television broadcast, approximations of this time are required.

Calculate:

1. a) The time truncated to the thousandths.

1. b) The time rounded to the thousandths.

1. c) The time rounded to the hundredths.

1. d) Briefly explain why the result of truncating and the result of rounding to the thousandths are different in this particular case.

In an electronics shop, the actual price of a smartphone is $456.28$ pesos. However, on the shop window advertising sign, the owner decides to display the price rounded to the nearest unit to make it more visually appealing.

Calculate:

• The approximate value displayed on the sign.

• The absolute error made with this approximation.

• The relative error expressed as a percentage (to two decimal places).

Consider the real numbers $A = \sqrt{7}$ and $B = \frac{22}{8}$.

1. a) Represent the number $A$ exactly on the number line using Pythagoras' theorem.
2. b) Approximate both numbers by rounding to three decimal places.
3. c) What relative error is made when approximating the sum $A + B$ by the number $5.4$?

We have two different measurements made by different operators:

1. A carpenter measures a wooden slat of $2.5$ meters and makes an absolute error of $1$ cm.

2. A surveyor measures a plot of land of $450$ meters and makes an absolute error of $1$ meter.

Calculate the relative error of each measurement and give reasons to determine which of the two approximations is of better quality (more precise).

Two sound technicians are calibrating equipment for a music festival. The first technician measures the length of an antenna cable and obtains $15.25$ m, when its actual value is $15.30$ m. The second technician measures the latency of a digital signal and obtains $0.018$ s, the actual value being $0.020$ s.

1. a) Calculate the absolute error made by each technician.
2. b) Determine which of the two measurements is more precise by comparing their relative errors.
3. c) If the first technician rounds their measurement to one decimal place, what would be the new relative error made?

A financial analyst uses the approximation of the golden ratio $\Phi \approx 1.618$ to predict the behavior of a cryptocurrency on a growth graph. Given that the exact value is $\Phi = \frac{1 + \sqrt{5}}{2}$:

1. a) Calculate the absolute error made in this approximation (use all the decimal places on your calculator for the exact value).
2. b) Calculate the relative error made.
3. c) If the analyst applies this ratio to an investment of $50\,000\,000$ pesos, what would be the difference in pesos between using the approximate value and the exact value? Is this error significant in a financial context?

Identify the number of significant figures in the following data obtained in a chemistry laboratory:

• $0.00405$ grams of a reactive compound.

• $120.70$ milliliters of distilled water.

• $3.50 \times 10^4$ particles per cubic centimeter.

• $2000$ bacteria in a sample (rounded to the nearest unit).

The mass of the Earth is approximately $5,972,200,000,000,000,000,000,000$ kg. In science textbooks, this number is usually expressed in scientific notation rounded to two decimal places (three significant figures).

1. a) Write the mass of the Earth in scientific notation with all its digits.

1. b) Write the rounded approximation that would be used in a textbook.

1. c) Calculate the absolute error bound associated with that rounding.

An investor analyzes the profitability of a cryptocurrency. The current value is $0.0004582$ pesos per unit. To simplify calculations on their mobile app, they decide to truncate this value to the hundred-thousandths (fifth decimal place).

1. a) Write the truncated value in scientific notation.
2. b) Calculate the absolute error and the relative error made by this truncation.
3. c) What would the relative error be if, instead of truncating, they had rounded to the same digit?

When measuring the thickness of a textbook with a ruler whose smallest division is millimeters, we obtain a value of $2.4$ cm.

State:

• The absolute error bound of this measurement.

• Between which values the actual thickness of the book lies, expressing the result as an interval.

To bake a giant cake, a baker adds the masses of the three main ingredients, which he has weighed on an industrial scale:

• Flour: $12.4$ kg (rounded to tenths).

• Sugar: $5.75$ kg (rounded to hundredths).

• Butter: $2.125$ kg (rounded to thousandths).

Calculate the total sum of the ingredients and round the final result so that it is consistent with the least precise measurement of the three. Justify your choice.

The radius of a circular skating rink has been measured with a tape measure, obtaining a value of $12.4$ meters. It is known that the absolute error made in this measurement is, at most, $0.05$ meters.

1. a) Write the interval in which the actual value of the radius lies.
2. b) Calculate the maximum and minimum possible values for the area of the rink (use $\pi \approx 3.14159$).
3. c) If we take as an approximation of the area the value calculated with the radius of $12.4$ m, what is the upper bound on the absolute error for that area?

An electronic component manufacturing company produces resistors that must have a nominal value of $470$ ohms ($\Omega$). Quality control permits a margin of error (tolerance) such that the actual value $R$ must satisfy the condition $|R - 470| \leq 15$.

1. a) Express the permitted resistance values as an interval on the real number line.
2. b) If a measured resistor gives a value of $482.5 \Omega$, is it within the tolerance margin?
3. c) Calculate the upper bound on the maximum relative error accepted by the company for this component.

Given the following sets of real numbers:

$A = \{x \in \mathbb{R} : |x - 1| < 3\}$

$B = [-2, 5]$

1. a) Express set $A$ as an interval.
2. b) Calculate and represent on the number line the intersection $A \cap B$ and the union $A \cup B$.
3. c) Determine whether the irrational number $\sqrt{10}$ belongs to any of these sets. Justify your answer by approximating the radical to two decimal places.

You can do it on paper and send a photo with your answer.

The speed of a fiber optic connection has been measured, giving a value of $540.5$ Mbps. The technician states that the relative error of the measurement is less than $0.05\%$.

1. a) Between which values can the actual connection speed lie?
2. b) If we round the result to the nearest ten Mbps, what would be the new upper bound on the maximum relative error incurred with respect to the actual speed, taking into account the interval found in part a)?

Consider the numbers $A = 5.42 \times 10^8$ and $B = 3.1 \times 10^7$. Both numbers have been rounded to the number of significant figures shown.

1. a) Determine the upper bounds on absolute error for $A$ and $B$.
2. b) Calculate the value of $S = A + B$ and express the result in standard form.
3. c) Find the upper bound on the relative error of the sum $S$. How does this relative error compare with the relative errors of $A$ and $B$ separately?

A high-precision microchip has a rectangular base whose dimensions have been measured with a laser calliper. The length obtained is $l = 4.25$ mm and the width is $w = 2.80$ mm. The measuring instrument is known to have a maximum absolute error of $0.005$ mm for each measurement. Calculate:

1. a) The upper bound of the absolute error made when calculating the area of the microchip.
2. b) The interval of possible values in which the actual area lies.
3. c) What is the maximum relative error made in calculating the area, expressed as a percentage rounded to three decimal places?

A hiker uses a mountain GPS to find their way. The device estimates the distance to their destination shelter using the formula $d = \sqrt{x^2 + y^2}$. At a point along the route, the recorded coordinates are $x = 800$ m and $y = 600$ m. However, the GPS has an inaccuracy (upper bound on absolute error) of $2$ meters along each axis.

Calculate the upper bound of the relative error made in estimating the total distance $d$. Round the result to four significant figures.

In a particle physics experiment, the mass of a sample is estimated to be $m = 3.45 \times 10^{-6}$ kg with a relative error of $0.2\%$. Simultaneously, the volume occupied by the sample is measured as $V = 1.2 \times 10^{-9}$ $m^3$ with an upper bound on absolute error of $0.05 \times 10^{-9}$ $m^3$.

Determine whether it is possible for the actual density ($\rho = m/V$) of the sample to exceed $3000$ $kg/m^3$, justifying your answer by calculating the corresponding error bounds.

A cylindrical fuel tank has a height of $H = 10.0$ m and a base radius of $R = 4.0$ m. The measurements were taken to a precision of one decimeter.

1. a) Calculate the nominal volume of the tank in cubic meters using $\pi \approx 3.1416$.
2. b) Determine the upper bound of the absolute error made in calculating the volume due to inaccuracy in the measurements of $R$ and $H$ (take the value of $\pi$ as exact for this part).
3. c) If the fuel expands and the actual volume is $1\%$ greater than the volume calculated from the measurements (which may deviate from the nominal value by up to the relative bound found in part b), what would be the total relative error with respect to the initial nominal value in the worst case?

Given the function $f(x) = \frac{1}{x-1}$, we want to calculate its value for $x = \sqrt{2}$.

1. a) Approximate the result using the value of $\sqrt{2}$ rounded to three decimal places.
2. b) Calculate the "exact" value (using all possible decimal places on the calculator).
3. c) Determine the absolute error and the relative error made.
4. d) Explain with reasons why, in this type of function, a small variation in the approximation of $x$ can produce a much larger relative error in the result of $f(x)$ when $x$ is close to $1$.

A seismograph scale uses logarithms to measure the energy released by an earthquake. If the energy $E$ (in joules) is related to the magnitude $M$ by the formula $\log E = 4.8 + 1.5M$:

1. a) Calculate the energy released by an earthquake of magnitude $M = 6.2$. Express the result in standard form, rounding the mantissa to two decimal places.
2. b) If we make an error of $0.1$ when measuring the magnitude ($M = 6.3$ instead of $6.2$), what is the percentage relative error made in calculating the energy?
3. c) Explain why a small error in the magnitude $M$ causes such a large error in the energy $E$.