Solutions
In a pharmaceutical laboratory in Houston, nobody says "add a bit of salt": exactly $2.347\ \text{g}$ are weighed on a precision balance and a flask is filled up to a mark etched on the glass. That precision is not just a chemist's fussiness: a badly prepared solution gives a useless experimental result, a wrongly dosed medicine or a water analysis that fails to detect a pollutant. In this section you will treat solutions with that same rigour: the vocabulary of solutions, the ways of measuring how much is dissolved (including molarity, the unit chemists use most, and how to convert between them), how solutions are really prepared and what happens, exactly, when they are mixed or diluted.
Three ways of expressing concentration
If you compare the label on a bottle of rubbing alcohol (70% v/v), a tub of hydrogen peroxide (3% w/w) and a bag of saline solution (9 g/L), you will see that they all state how much solute they contain, but using completely different units: why isn't concentration always measured in the same way?
A solution is a homogeneous mixture of a solute (the substance that dissolves) in a solvent (usually the component present in the larger amount, such as water). A solution is unsaturated if it can still dissolve more solute at that temperature, saturated if it holds the maximum possible, and supersaturated if it temporarily holds more than the maximum (this is unstable). A standard solution is one whose concentration is accurately known.
The same solution can be described in several different ways, depending on which two quantities are compared. Choosing the right one depends on whether the solute is a solid, a liquid or a gas, and on which piece of data is most practical to measure in each situation.
To fertilize her balcony plants, Nora dissolves $30\ \text{g}$ of soluble fertilizer in water to make $2\ \text{L}$ of solution. Mass concentration is calculated by…
To fertilize her balcony plants, Nora dissolves $30\ \text{g}$ of soluble fertilizer in water to make $2\ \text{L}$ of solution. Mass concentration is calculated by dividing the grams of solute by the liters of solution. What is the concentration of the fertilizer, in $\text{g/L}$?
To gargle, Mateo dissolves $5\ \text{g}$ of salt in $95\ \text{g}$ of water. a) How many grams of solution does he obtain in total? b) Percentage by mass is calculated…
To gargle, Mateo dissolves $5\ \text{g}$ of salt in $95\ \text{g}$ of water.
- a) How many grams of solution does he obtain in total?
- b) Percentage by mass is calculated by dividing the mass of solute by the total mass of solution and multiplying by $100$. What is the percentage by mass of salt?
A homemade hand sanitizer gel is prepared by mixing $30\ \text{mL}$ of alcohol with aloe vera to make up $150\ \text{mL}$ of gel. Percentage by volume is calculated by…
A homemade hand sanitizer gel is prepared by mixing $30\ \text{mL}$ of alcohol with aloe vera to make up $150\ \text{mL}$ of gel. Percentage by volume is calculated by dividing the volume of solute by the total volume of solution and multiplying by $100$. What is the percentage by volume of alcohol in the gel?
Diluted bleach for mopping the floor contains $5\ \text{g}$ of sodium hypochlorite per liter. If you fill a bucket with $4\ \text{L}$ of this solution, how many grams of…
Diluted bleach for mopping the floor contains $5\ \text{g}$ of sodium hypochlorite per liter. If you fill a bucket with $4\ \text{L}$ of this solution, how many grams of hypochlorite are in the bucket?
A hospital glucose IV bag has a concentration of $5\ \%$ by mass of glucose. a) How many grams of glucose does a $500\ \text{g}$ bag of glucose solution contain? b) And…
A hospital glucose IV bag has a concentration of $5\ \%$ by mass of glucose.
- a) How many grams of glucose does a $500\ \text{g}$ bag of glucose solution contain?
- b) And how many grams of water?
Complete the sentence with the missing words: "Concentration in grams per liter relates the mass of $\dots$ to the $\dots$ of solution; percentage by mass relates the…
Complete the sentence with the missing words: "Concentration in grams per liter relates the mass of $\dots$ to the $\dots$ of solution; percentage by mass relates the mass of solute to the total $\dots$ of solution; and percentage by $\dots$ is used mainly when the solute is a liquid or a gas." Then give an example of a solution for each of the three ways of expressing concentration.
In the lab, Emma dissolves $12\ \text{g}$ of potassium nitrate in water to make $300\ \text{mL}$ of solution. Calculate the concentration in $\text{g/L}$. Note: convert…
In the lab, Emma dissolves $12\ \text{g}$ of potassium nitrate in water to make $300\ \text{mL}$ of solution. Calculate the concentration in $\text{g/L}$. Note: convert the volume to liters first.
To clean silver, Olivia prepares a solution with $40\ \text{g}$ of sodium hydrogen carbonate in $360\ \text{g}$ of water. a) What total mass of solution does she obtain?…
To clean silver, Olivia prepares a solution with $40\ \text{g}$ of sodium hydrogen carbonate in $360\ \text{g}$ of water.
- a) What total mass of solution does she obtain?
- b) Calculate its percentage by mass of bicarbonate.
The label on a carton of milk states that it provides $125\ \text{mg}$ of calcium per $100\ \text{mL}$ of milk. a) Express this concentration in $\text{g/L}$. b) How…
The label on a carton of milk states that it provides $125\ \text{mg}$ of calcium per $100\ \text{mL}$ of milk.
- a) Express this concentration in $\text{g/L}$.
- b) How many milligrams of calcium do you consume if you have a $200\ \text{mL}$ glass of milk for breakfast?
An aquarium needs a treatment of $10\ \text{g}$ of a medication sold as a $25\ \text{g/L}$ solution. a) What volume of solution must you measure, in liters? b) Express…
An aquarium needs a treatment of $10\ \text{g}$ of a medication sold as a $25\ \text{g/L}$ solution.
- a) What volume of solution must you measure, in liters?
- b) Express it in milliliters.
For a crystallization experiment, you must prepare $400\ \text{g}$ of a $8\ \%$ by mass potassium nitrate solution. a) How many grams of potassium nitrate and how many…
For a crystallization experiment, you must prepare $400\ \text{g}$ of a $8\ \%$ by mass potassium nitrate solution.
- a) How many grams of potassium nitrate and how many grams of water should you weigh?
- b) Describe how you would prepare the solution and explain why this time you do not need a volumetric flask or to top up to the mark.
- c) Then you add $100\ \text{g}$ more of water. What is the new percentage by mass?
Water, solutes and solubility
Why does salt vanish in a glass of water but cooking oil just floats on top? And why can a pot of hot water hold more sugar than a cold one?
Water is a polar molecule: the oxygen end is slightly negative and the hydrogen ends are slightly positive. Water molecules pull on the ions of a salt like NaCl and surround them, pulling them out of the crystal. Sugar dissolves because its molecules are polar too. Oil is nonpolar, so water does not attract it and the two stay separate: "like dissolves like."
A solute that makes ions in water is an electrolyte, and its solution conducts electricity (salt, HCl). A solute that dissolves as whole molecules is a nonelectrolyte and its solution does not conduct (sugar, ethanol).
A solubility curve graphs how many grams of solute dissolve in 100 g of water at each temperature. Any point on the curve is a saturated solution; below it, unsaturated; above it, supersaturated (unstable: crystals appear when disturbed). For most solids, solubility rises with temperature. For gases, it falls.
How fast a solid dissolves (the rate of dissolution) increases with higher temperature, stirring (agitation) and a larger surface area (crushed solid). These change the speed, not the maximum amount that dissolves.
Dry air is a solution of gases: $78\ \%$ of nitrogen, $21\ \%$ of oxygen and $1\ \%$ of argon and other gases, by volume. The figure summarizes this composition. a) What…
Dry air is a solution of gases: $78\ \%$ of nitrogen, $21\ \%$ of oxygen and $1\ \%$ of argon and other gases, by volume. The figure summarizes this composition.
- a) What is the solvent in air? Give reasons for your answer.
- b) Approximately how many liters of oxygen are there in $10\ \text{L}$ of air?
Preparing a solution in the laboratory
Calculating a concentration with a formula is only half the job: in a real laboratory that calculation has to be put into practice with specific instruments, and each step has a precise name. Safe practice matters too: before you start, read the Safety Data Sheet (SDS), wear safety goggles and a lab coat, and work in a fume hood if the substances are harmful.
A measurement is precise if repeated readings agree closely, and accurate if it is close to the true value. A volumetric flask or pipette gives better accuracy than a beaker or graduated cylinder. Unrecorded errors, such as a balance that is not tared, are systematic errors; reading a meniscus slightly differently each time gives a random error.
In the lab, you are going to prepare $250\ \text{mL}$ of a solution using a volumetric flask. Put these steps in order and explain each one in your own words: a) Add…
In the lab, you are going to prepare $250\ \text{mL}$ of a solution using a volumetric flask. Put these steps in order and explain each one in your own words:
- a) Add water up to the mark on the neck of the flask.
- b) Weigh the solute on the balance.
- c) Dissolve the solute in a beaker with a little water.
- d) Transfer the solution to the flask using a funnel and add water almost up to the mark.
What exactly does "filling to the mark" mean?
You are asked to prepare $500\ \text{mL}$ of a copper sulfate solution with a concentration of $8\ \text{g/L}$. a) How many grams of copper sulfate should you weigh out?…
You are asked to prepare $500\ \text{mL}$ of a copper sulfate solution with a concentration of $8\ \text{g/L}$.
- a) How many grams of copper sulfate should you weigh out?
- b) Describe how you would prepare the solution in the lab, naming the apparatus you would use (balance, beaker, funnel, $500\ \text{mL}$ volumetric flask...) and at what point you fill to the mark.
Three classmates each prepare $250\ \text{mL}$ of a $10\ \text{g/L}$ solution by weighing $2.5\ \text{g}$ of salt, but each makes a mistake: a) Ioana does not tare the…
Three classmates each prepare $250\ \text{mL}$ of a $10\ \text{g/L}$ solution by weighing $2.5\ \text{g}$ of salt, but each makes a mistake:
- a) Ioana does not tare the balance with the watch glass, so she actually weighs out less salt than she thinks.
- b) Bruno tops up the flask above the mark on the neck.
- c) Carla transfers the solution to the flask but forgets to rinse the remaining salt stuck to the beaker with a little water.
For each case, explain what the error consists of and reason whether the actual concentration of their solution is above, below or equal to $10\ \text{g/L}$.
Density as a bridge between mass and volume
A commercial carboy of concentrated hydrochloric acid states "37% w/w" on its label, but in the laboratory the liquid is not weighed: it is measured directly with a graduated cylinder in milliliters; how many grams of pure acid are you really pouring in every milliliter of solution?
Percentage by mass compares masses; concentration in g/L compares a mass with a volume. To convert from one to the other you need a piece of data that relates mass and volume: the density of the solution, defined as $\rho = m/V$ (for example in $\text{g/mL}$).
Percentage by volume appears mainly when the solute is itself a liquid or a gas: the air you breathe is a gaseous solution, with nitrogen as the solvent (the main component) and oxygen, argon and other gases as solutes.
A surface disinfectant label states "$70\ \%$ alcohol by volume". How many milliliters of alcohol does a $250\ \text{mL}$ bottle of this disinfectant contain?
A surface disinfectant label states "$70\ \%$ alcohol by volume". How many milliliters of alcohol does a $250\ \text{mL}$ bottle of this disinfectant contain?
A salt solution has a density of $1.05\ \text{g/mL}$ and a concentration of $10\ \%$ by mass. a) What is the mass of $1\ \text{L}$ of this solution? b) How many grams of…
A salt solution has a density of $1.05\ \text{g/mL}$ and a concentration of $10\ \%$ by mass.
- a) What is the mass of $1\ \text{L}$ of this solution?
- b) How many grams of salt are in that liter?
- c) Express the concentration in $\text{g/L}$.
- d) Is a $10\ \%$ solution by mass the same as a $10\ \text{g/L}$ solution? Give reasons for your answer using the previous results.
Mixing and diluting solutions
In a laboratory you almost never work with the solution exactly as it comes from the supplier: it has to be diluted to the concentration a protocol requires, or several different solutions have to be mixed in the same container. In both cases, what is always conserved is the mass of solute, never the concentration.
For mopping, you dilute $50\ \text{mL}$ of bleach at $40\ \text{g/L}$ in water to make $2\ \text{L}$ of solution. Look at the diagram of the dilution. a) How many grams…
For mopping, you dilute $50\ \text{mL}$ of bleach at $40\ \text{g/L}$ in water to make $2\ \text{L}$ of solution. Look at the diagram of the dilution.
- a) How many grams of hypochlorite are in those $50\ \text{mL}$ of bleach?
- b) What is the concentration of the solution in the bucket, in $\text{g/L}$?
- c) Explain why the mass of hypochlorite does not change when adding water, even though the concentration does.
You have $50\ \text{mL}$ of a dye solution at $36\ \text{g/L}$ and you want to obtain a solution of $12\ \text{g/L}$. a) To what final volume must you dilute it with…
You have $50\ \text{mL}$ of a dye solution at $36\ \text{g/L}$ and you want to obtain a solution of $12\ \text{g/L}$.
- a) To what final volume must you dilute it with water?
- b) Approximately what volume of water needs to be added?
- c) Check the result using $c_1\times V_1=c_2\times V_2$.
A laboratory purchases a stock solution of a reagent with a concentration of $60\ \text{g/L}$. For a lab practical, you need $500\ \text{mL}$ of a diluted solution of…
A laboratory purchases a stock solution of a reagent with a concentration of $60\ \text{g/L}$. For a lab practical, you need $500\ \text{mL}$ of a diluted solution of $12\ \text{g/L}$.
- a) What volume of the stock solution must you measure?
- b) Describe the entire procedure in the laboratory: what equipment you use (pipette or graduated cylinder, $500\ \text{mL}$ volumetric flask, dropper…) and what bringing to the mark means.
- c) Why is it not enough to just measure the calculated volume of stock solution and add the rest of the water measured with a graduated cylinder to reach $500\ \text{mL}$?
You mix $200\ \text{mL}$ of a $30\ \text{g/L}$ salt solution with $300\ \text{mL}$ of another salt solution at $10\ \text{g/L}$ in the same container. Assume the final…
You mix $200\ \text{mL}$ of a $30\ \text{g/L}$ salt solution with $300\ \text{mL}$ of another salt solution at $10\ \text{g/L}$ in the same container. Assume the final volume is the sum of the two. The diagram shows the mixture.
- a) How many grams of salt does each solution provide?
- b) What is the concentration of the mixture, in $\text{g/L}$?
- c) Why is the final concentration not $20\ \text{g/L}$, the mean of the two concentrations?
A juice factory concentrates $800\ \text{kg}$ of juice containing $12\ \%$ by mass of sugars. Evaporating some of the water leaves $300\ \text{kg}$ of concentrated…
A juice factory concentrates $800\ \text{kg}$ of juice containing $12\ \%$ by mass of sugars. Evaporating some of the water leaves $300\ \text{kg}$ of concentrated juice.
- a) How many kilograms of sugars were there at the start?
- b) How many kilograms of water evaporated?
- c) What is the percentage by mass of sugars in the concentrated juice?
- d) Explain why the percentage increased even though not a single gram of sugar was added.
The E5 gas that Sara puts in her motorcycle contains $5\ \%$ by volume of bioethanol. a) How many liters of bioethanol are in a $20\ \text{L}$ tank of E5? b) Sara mixes…
The E5 gas that Sara puts in her motorcycle contains $5\ \%$ by volume of bioethanol.
- a) How many liters of bioethanol are in a $20\ \text{L}$ tank of E5?
- b) Sara mixes those $20\ \text{L}$ of E5 with $20\ \text{L}$ of ethanol-free gas from a gas can. What percentage by volume of ethanol does the mixture have now?
- c) Explain why it is incorrect to either add the percentages ($5\ \%+0\ \%=5\ \%$) or keep $5\ \%$.
You prepare solution A by dissolving $18\ \text{g}$ of salt in water to make $300\ \text{mL}$. Then you take $100\ \text{mL}$ of A, pour them into a flask and top up…
You prepare solution A by dissolving $18\ \text{g}$ of salt in water to make $300\ \text{mL}$. Then you take $100\ \text{mL}$ of A, pour them into a flask and top up with water to $400\ \text{mL}$: this is solution B.
- a) Calculate the concentration of A, in $\text{g/L}$.
- b) How many grams of salt are in the $100\ \text{mL}$ taken from A?
- c) Calculate the concentration of B from those grams.
- d) Check that you get the same result using the dilution formula, $c_1\times V_1=c_2\times V_2$, and explain why it works: what is always conserved when diluting?